RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050285 REAR DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR OUTSIDE MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH side and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 75078 1.INSTALL REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH

HINT:

When installing the rear door lower outside moulding, heat the rear door panel and rear door lower outside moulding using a heatlight.


Standard:
Item Temperature
Rear Door Panel 40 to 60°C (104 to 140°F)
Rear Door Lower Outside Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the rear door panel and rear door lower outside moulding excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B340209
1.208,0.271 1.073,0.271 1.073,0.271 1.073,0.802 true 1.677,1.073 1.677,1.563 1.677,1.563 1.833,1.563 true 1.229,0.188 1.542,0.344 0.313,0.156 10 *1 1.865,1.49 2.177,1.646 0.313,0.156 10 *2
*1
*2
*1 Protective Tape
*2 Double-sided Tape


Install the rear door lower outside moulding sub-assembly LH.

i.

Using a heat light, heat the rear door lower outside moulding sub-assembly LH and the vehicle body surface.


ii.

Remove the peeling paper from the face of the rear door outside moulding upper pad.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Attach the 7 clips and double-sided tape to install the rear door lower outside moulding sub-assembly LH.

HINT:

Press the rear door lower outside moulding sub-assembly LH firmly to install it.